Motor: 3 H.P., with ball bearings, in a sealed enclosure.
Front bearing lubricated by transmission, rear bearing is
grease packed, sealed for life.
Electrical: 200/60/1, 230/60/1, 200/60/3, 230/60/3 and
460/60/3 – UL Listed. 220/50/1, 220/50/3, 380-415/50/3 –
Not submitted for UL Listing.
TRANSMISSION: Double reduction, oil-lubricated
hardened helical cut steel gears. Worm speed is only
151 RPM. Thrust from chopper worm is taken by a tapered
roller bearing mounted in attachment hub on face of
transmission housing. Double lip seal prevents loss of oil
or entrance of moisture.
CAPACITY: Fresh meat capacity of 35 to 40 pounds per
minute, first cutting, through a 1/8 plate – and 25 to
30 pounds of beef per minute on second cutting through
a 1/8 plate.
FEED PAN: Feed pan features large capacity, measures
34" long, 21" wide and 415⁄16" deep inside. Furnished in 14
gauge stainless steel. A cast aluminum guard is permanently
mounted to the front and sides of the pan with
hardened steel drive screws. The pan is secured to the top
of the housing with screws. It is separated from the motor
area by a heavy sheet of fiberglass insulation to block
transfer of heat from the motor compartment to the meat.
LEGS: Leg length on these standard table models
provides 8" clearance between table and lowest point on
adjusting ring. Legs in three different lengths (15", 18" and
21") are available at extra cost to convert machine into a
floor model. The floor model can be leveled, by adjusting
the legs.
STANDARD EQUIPMENT: Consists of working power
unit, magnetic-type contractor wired to water-proof
junction box on rear of machine; chopping end; stainless
steel feed pan with guard; tinned steel meat deflector
mounted to chopping end; plastic feed stomper; cylinder
wrench (for loosening cylinder nuts, adjusting ring, or
removing worm); 53⁄8" legs cushioned on the bottom with
resilient neoprene feet.
WEIGHT: Model 4732A-10 – Net 305 lbs. Shipping 318 lbs.
Leasing Plans Availble
If you don’t see the Model or Item you are looking for please call our Customer Service.
We can’t list all items but we do carry the complete line.
Free Shipping Within the Continental US to a commercial address only. Residential delivery add $50.00. Hydraulic Tail Gate Add $125.
RESTOCKING OR REFUSED DELIVERY IS SUBJECT TO 20% RESTOCKING FEES AND FREIGHT CHARGES!
